DA-660-8/16-LX User’s Manual
Managing Communications
4-20
fi
done
IFS=$oIFS
if [ “$FOUND” = “no” ]; then
modprobe $mname
fi
}
start()
{
ifcfg_vpn
if [ ! \( -d “/dev/net” \) ]; then
mkdir /dev/net
fi
if [ ! \( -r “/dev/net/tun” \) ]; then
# create a device file if there is none
mknod /dev/net/tun c 10 200
fi
# load modules “tun” and “bridge”
mname=tun
module_up
mname=bridge
module_up
# create an ethernet bridge to connect tap devices, internal interface
brctl addbr br0
brctl addif br0 $iface
# the bridge receives data from any port and forwards it to other ports.
i=`expr 0`
while :
do
# generate a tap0 interface on tun
openvpn --mktun --dev tap${i}
# connect tap device to the bridge
brctl addif br0 tap${i}
# null ip address of tap device
ifconfig tap${i} 0.0.0.0 promisc up
i=`expr $i + 1`
if [ $i -ge $maxtap ]; then
break
fi
done
# null ip address of internal interface
ifconfig $iface 0.0.0.0 promisc up
# enable bridge ip
ifconfig br0 $IPADDR netmask $NETMASK broadcast $BROADCAST
ipf=/proc/sys/net/ipv4/ip_forward
# enable IP forwarding
echo 1 > $ipf
echo “ip forwarding enabled to”
cat $ipf
}
stop() {
echo “shutdown openvpn bridge.”
ifcfg_vpn
i=`expr 0`
while :
do
