3-14
Smartio
C168H/HS User’s Manual
Configuring Board and Port
If you already have installed the driver and want to re-configure the
Smartio
C168
Series board and ports, add more boards or delete boards under Windows 95/98, the
following is the procedure for you.
1.
Click on the Taskbar [
Start
]
button, then select [
Programs
]
menu, then
[
MOXA Utilities
]
menu and then
[
Moxa Smartio/Industio Configuration
Panel
] icon.
2.
The Smartio/Industio configuration panel will be popped up. Please see steps 5-
7 in the previous Section “Installing Driver” for more details.
In this configuration panel, you may:
l
Click [
Property
] to enter “Property” dialog box to configure the selected
board with the correct “COM Number”, “INT Vector”, “Interrupt no” and
“Base I/O Port Address”. Please see
steps 5 to 7
in the previous section,
“Installing Driver”, for more details, except that the “Board Type” field is
not supposed to be changed.
l
Click [
Add
] to add one more board that is not yet configured in the system.
Please see
steps 5 to 7
in the previous section, “Installing Driver”, for more
details.
l
Click [
Remove
] to remove the board currently selected from the configured
board list.
l
Click [
OK
] to confirm the configuration changes you made.
l
Click [
Cancel
] to leave the dialog with the configuration unchanged.