MGate 5105-MB-EIP
MGate Manager Configuration
3-8
ATTENTION
When modifying the local time, select the time zone first. The time display will be updated to reflect the
specified time zone.
Network Settings
The Network tab is where the unit’s network settings are configured. You can modify the Name, Network
Configuration, IP Address, Netmask, Default Gateway, and DNS.
Ethernet Settings
Parameter
Value
Notes
IP Configuration
Static IP, DHCP, BOOTP
Select “Static IP” if you are using a
fixed IP address. Select one of the
other options if the IP address is set
dynamically.
IP Address
192.168.127.254
(or other 32-bit number)
The IP (Internet Protocol) address
identifies the server on the TCP/IP
network.
Netmask
255.255.255.0
(or other 32-bit number)
This identifies the server as belonging
to a Class A, B, or C network.
Gateway
0.0.0.0
(or other 32-bit number)
This is the IP address of the router that
provides network access outside the
server’s LAN.
DNS Server
Parameter
Value
Notes
DNS Server 1
0.0.0.0
(or other 32-bit number)
This is the IP address of the primary
domain name server.
DNS Server 2
0.0.0.0
(or other 32-bit number)
This is the IP address of the secondary
domain name server.
Serial Settings
MGate 5105-MB-EIP serial interface supports RS-232, RS-485 2-wire, RS-485 4-wire and RS-422 interfaces.
You must configure baudrate, parity, data bits, and stop bits before using serial interface with Modbus
RTS/ASCII protocol. Incorrect settings will result in communication failures.
