A-2
Industio
CP-134U Series User’s Manual
Power requirement
CP-134U
420 mA max. (+5V)
CP-134UI
700 mA max. (+5V)
CP-134IS
710 mA max. (+5V)
Dimensions
CP-134U
120 × 80 mm
(W × D)
CP-134UI
120 × 110 mm (W × D)
CP-134S
120 × 80 mm
(W × D)
CP-134IS
120 × 110 mm (W × D)
Operating Systems
Windows 95/98/NT/2000/XP, Linux
PCI
The 32-bit
Industio
CP-134U Series board complies with PCI Specifications 2.1. The IRQ
and I/O address hardware configuration is automatically assigned by the PCI BIOS. This
means that you must
first plug in the board
before installing the driver software.
As opposed to ISA slots, different PCI slots in the same PC may have different bus numbers
and device numbers with respect to the PCI specifications. The same PCI board will have
different system configurations if switched to a different PCI slot; this is called
slot-sensitive
or
slot-dependent
. This may also apply to PCI slots in a PC with a different motherboard,
which may use
different device number sets
. For example, some use 17, 18, 19, and 20 for
identifying the respective PCI slots, but some use 11, 12, 13 and 14.
Due to
slot-dependency
, it is necessary to
re-configure the driver software
once the board
is plugged into different PCI slots.
Up to 4
Industio
CP-134U Series boards are allowed in one system. When installing more
than one board,
please remember the order the boards are installed
to distinguish the
installed boards from each other.
.
