background image

 

 

Industio

Industio

Industio

Industio

 

CP-134U Series User’s Manual 

The software described in this manual is furnished under a license agreement and may be used only in 

accordance with the terms of that agreement. 

 
 

Copyright Notice 

 

Copyright 

 2003 Moxa Technologies Co., Ltd. 

All rights reserved. 

Reproduction without permission is prohibited. 

 
 

Trademarks 

 

MOXA is a registered trademark of Moxa Technologies Co., Ltd. 

All other trademarks or registered marks in this manual belong to their respective manufacturers. 

 

Disclaimer 

 
Information in this document is subject to change without notice and does not represent a commitment on 
the part of Moxa.

 

Moxa provides this document “as is,” without warranty of any kind, either expressed or implied, 
including, but not limited to, its particular purpose. Moxa reserves the right to make improvements and/or 
changes to this manual, or to the products and/or the programs described in this manual, at any time. 

Information provided in this manual is intended to be accurate and reliable. However, Moxa Technologies 
assumes no responsibility for its use, or for any infringements on the rights of third parties that may result 
from its use. 

This product might include unintentional technical or typographical errors. Changes are periodically 
made to the information herein to correct such errors, and these changes are incorporated into new 
editions of the publication. 

Summary of Contents for Industio CP-134UL






















































































Reviews: