Moxa Technologies Industio C114HI, Manual

Page: 18 / 60

Software Installation
l l
Chapter 3
12
The screen will show:
You would like to install a:
1. 1 port card
2. 2 port card
3. 4 port card
4. ......
Enter number 3 to choose "4 port card". The screen then shows:
The card is configured as:
1. COM1
2. COM2
3. COM3
4. COM4
For first C114HI 4 port board, choose number 1 (COM1); for second, number 2
(COM2). Then the screen shows like:
Which card do you have?
1. Arnet base address 0xaaa
2. Arnet base address 0xbbb
3. Hostess base address 0xccc
4. ......
For first C114HI 4 port board, select "Arnet base address 0x280"; for second,
"Arnet base address 0x300". Follow the on-line instruction to complete the rest of
the installation procedure.
Once the installation is successfully completed, the following serial devices along
with their modem devices (upper-case) will be added to the system.
tty1a tty1b tty1c tty1d (first C114HI)
tty2a tty2b tty2c tty2d (second C114HI)
Be sure to activate the device by using SCO command:
# enable ttyxx
3.3 OS/2
The C114HI can be driven either by the default device driver accompanying with