IA3341 Hardware User's Manual
Hardware Introduction
2-4
ATTENTION
Reset to Default preserves user’s data
The
Reset to Default
function will NOT format the user directory and erase the user’s data. Using the Reset
to default function will only load the configuration file. The rest of the user’s data stored in the Flash ROM will
remain intact.
Real Time Clock
The IA3341’s real time clock is powered by a lithium battery. We strongly recommend that you do not replace
the lithium battery without help from a qualified Moxa support engineer. If you need to change the battery,
contact the Moxa RMA service team.
WARNING
There is a risk of explosion if the battery is replaced by an incorrect type.
Placement Options
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate is already attached to the product’s casing. To attach the IA3341 to
a DIN-Rail, make sure that the stiff metal spring is facing the top of the IA3341, as shown in the following
figures.
STEP 1: Insert the top of the DIN-Rail into the
slot just below the stiff metal spring.
STEP 2: The DIN-Rail attachment unit will snap
into place as shown.
metal
spring
DIN-Rail
metal
spring
DIN-Rail
To remove the IA3341 from the DIN-Rail, simply reverse Steps 1 and 2.
