Software Installation
CP-132U Series User’s Manual
3-51
4.
# modprobe mxser <- Universal PCI or PCI
(If you install ISA Boards, ase type command # insmod mxser ioaddr=0x???, 0x???,
0x???, 0x???
<- 1st ISA, 2nd ISA, 3rd ISA, 4th ISA)
Using /lib/modules/2.4.20-8/kernel/drivers/char/mxser.o
Warning: loading /lib/modules/2.4.20-8/kernel/drivers/char/mxser.o will taint the
kernel: no license
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
MOXA Smartio/Industio family driver version 1.7
Tty devices major number = 30, callout devices major number = 35
Found MOXA CP-168U series board (BusNo=2,DevNo=13)
Module mxser loaded, with warnings
5.
You can use Moxa diagnostic utility to verify driver status.
# cd /moxa/mxser/utility/diag
# ./msdiag
== MOXA Smartio/Industio Family Multiport Board Status Utility(1.1) ==
Tty Device Major Number= 30.
Callout device Major Number= 35.
Board 1 : CP-168U series (BusNo=2, DevNo=13)
Port 1: 0xac00, max. baud rate = 230400 bps.
Port 2: 0xac08, max. baud rate = 230400 bps.
Port 3: 0xac10, max. baud rate = 230400 bps.
Port 4: 0xac18, max. baud rate = 230400 bps.
Port 5: 0xac20, max. baud rate = 230400 bps.
Port 6: 0xac28, max. baud rate = 230400 bps.
Port 7: 0xac30, max. baud rate = 230400 bps.
Port 8: 0xac38, max. baud rate = 230400 bps.
6.
You can use Moxa terminal utility to test tty port.
# cd /moxa/mxser/utiltiy/term
# ./msterm
Summary of Contents for CP-132U Series
Page 12: ...CP 132U Series User s Manual 2 4 CP 132UL V2 120 x 64 5 mm CP 132UL V1 120 x 64 5 mm...
Page 66: ......
Page 80: ......
