background image

 

CP-132U Series User’s Manual 

3-32

all ports. 

 

6.

 

Select a Tx FIFO Size from the Tx FIFO Level pull-down list. Tx FIFO Levels from 
High to Low are available, with the default set to High (128 bytes). Check 

Set the 

change to all ports

 check-box to apply the just defined Tx FIFO Size to all ports. 

 

 

 

CP-132UL V2/CP-132UL-I V2 CP-132UL/CP-132U-I

 

Tx FIFO 

Rx FIFO 

Tx FIFO  Rx FIFO 

High 128 

120  64  56 

Middle

64 60 

32 

28 

Low 1 

1  1 

Unit: Bytes

 

7.

 

To complete the update, click 

[OK]

 in the

 Port X

 dialog box, click 

[OK]

 in the 

CP-168U board Properties

 dialog box, and then click 

[OK]

 on the 

Device Manager

 

tab. 

 
8.

 

Restart the system to activate the latest configuration. 

 

 
 

 

Updating the Driver 

This section explains how to update the Windows 95/98 driver. 

1.

 

Open [

Control Panel

], click on the [

System

] icon, and select the [

Device Manager

tab. 

 
2.

 

Click on the 

MOXA CP-168U board

 and then click on [

Properties

]. 

Summary of Contents for CP-132U Series

























































































Reviews: