CN2510
Setting Up Dialin/out
10-10
Setting
Value
Notes
Necessity
Auto-link protocol
None/Telnet/
Rlogin
None:
Do not connect to the host
automatically.
Telnet:
Connects to the host automatically by
Telnet.
Rlogin:
Connects to the host automatically by
Rlogin.
Optional
Telnet TCP port
23
By default, the Telnet TCP port number is set to
23, which is the default TCP port number for
Telnet. If you need to telnet to this CN2510
serial port, set the Telnet TCP port to a different
number. We recommend using 4001, 4002, etc.
for ports 1, 2, etc. to avoid conflicts with other
ports.
Optional
Primary host IP
IP address or
the name
defined in the
[Host] table
If specified, designates a ‘permanent’ host to
which the terminal will always be connected.
Optional
Link by input IP
Enable/
Disable
For users to enter the connection IP address
manually.
Optional
Secondary host IP
IP address or
the name
defined in the
[Host] table.
If specified, designates a secondary ‘permanent’
host to which the terminal will be connected.
Optional
Auto-login prompt
ogin:
Send ID information when this prompt is
received.
Optional
Password prompt
assword:
Send Password information when this prompt is
received
Optional
Login user name
Login ID
Optional
Login password
Login Password
Optional
Terminal type
ansi
Terminal type for outgoing connection
Optional
Inactivity time
0-99 minutes
Idle time before the port is disconnected
automatically. If set to 0 minutes, the port will
not disconnect.
Optional
Authentication type
None/local/
server
None:
Authentication is not required.
local:
Check the ID stored in the User_table
(defined under the SERVER MENU).
Server:
Check the ID with the external
RADIUS server. Refer to Appendix C for RADIUS
installation information.
Optional
TCP alive check time 0-99 minutes
The time period CN2510 waits before checking if
the TCP connection is alive or not. If no response
is received, CN2510 will reset the port and
terminate the connection.
Optional
7.
To configure the
PPPD
mode parameters, move the cursor to the Detail setting column to highlight
PPP
parameters
, and then press
Enter
.
+------------------------------------------------------+
|
Enable Detail setting
|
| TERM_BIN mode
[yes] [Term parameters
]
|
| PPPD mode
[yes] [
PPP parameters
]
|
| SLIPD mode
[yes] [SLIP parameters
]
|
|------------------------------------------------------|
| Authentication type
[local ]
|
+------------------------------------------------------+
