CN2510
Setting Up Terminal
8-8
Setting
Value
Notes
Necessity
Secondary host IP
IP address or
the name
defined in the
[Host] table.
If specified, designates a secondary ‘permanent’
host to which the terminal will be connected.
Optional
Auto-login prompt
ogin:
Send ID information when this prompt is
received.
Optional
Password prompt
assword:
Send Password information when this prompt is
received
Optional
Login user name
Login ID
Optional
Login password
Login Password
Optional
Terminal type
ansi
Terminal type for outgoing connection
Optional
Inactivity time
0-99 minutes
Idle time before the port is disconnected
automatically. If set to 0 minutes, the port will
not disconnect.
Optional
Authentication type
None/local/
server
None:
Authentication is not required.
local:
Check the ID stored in the User_table
(defined under the SERVER MENU).
Server:
Check the ID with the external
RADIUS server. Refer to Appendix C for RADIUS
installation information.
Optional
TCP alive check time 0-99 minutes
The time period CN2510 waits before checking if
the TCP connection is alive or not. If no response
is received, CN2510 will reset the port and
terminate the connection.
Optional
5.
Press
Esc
to return to the
PORT MENU
.
Configuring the Serial Ports
Open
Port Menu
Line
to configure serial port settings.
1.
From the
MAIN MENU
, select
Port
, and then press
Enter
.
CN2510-8
CN2510-8_5631 V2.0
MAIN MENU
------------------------------------------------------------------------------
Server
[Port]
seTting sAve Utility Restart Exit
Examine/modify async server ports configuration
Enter: select ESC: previous menu
2.
From the
PORT MENU
, select
Mode
, and then press
Enter
.
CN2510-8
CN2510-8_5631 V2.0
PORT MENU
------------------------------------------------------------------------------
Mode
[Line]
mOdem Welcome_MSG Quit
Examine/modify asynchronous port configuration
Enter: select ESC: previous menu
