CN2510
Setting Up Multiplex
12-9
10.
The pop-up selector contains input/display fields for
Quit key
,
Auto-link protocol
,
Link by input IP
,
Auto-login prompt
,
Terminal type
,
Inactivity time
,
Authentication type
, and
TCP alive check time
.
Each item is described in detail below the figure.
+--------------------------------------------------+
| Quit key
: [^E]
|
| Auto-link protocol
: [none ]
|
| Telnet TCP port
: [23 ]
|
| Primary host IP
: [
]
|
| Link by input IP
: [Disable]
|
| Secondary host IP : [
]
|
| Auto-login prompt
: [ogin:
]
|
| Password prompt
: [assword:
]
|
| Login user name
: [
]
|
| Login password
: [
]
|
| Terminal type
: [ansi ]
|
| Inactivity time
: [0 ] minutes
|
| Authentication type : [local ]
|
| TCP alive check time : [0 ] minutes
|
+--------------------------------------------------+
Setting
Value
Notes
Necessity
Quit Key
^E
Defines the Quit key used to disconnect the link
between the current terminal session and the
remote host. It may be left blank for binary
communication.
Optional
Auto-link protocol
None/Telnet/
Rlogin
None:
Do not connect to the host
automatically.
Telnet:
Connects to the host automatically by
Telnet.
Rlogin:
Connects to the host automatically by
Rlogin.
Optional
Telnet TCP port
23
By default, the Telnet TCP port number is set to
23, which is the default TCP port number for
Telnet. If you need to telnet to this CN2510 serial
port, set the Telnet TCP port to a different
number. We recommend using 4001, 4002, etc.
for ports 1, 2, etc. to avoid conflicts with other
ports.
Optional
Primary host IP
IP address or
the name
defined in the
[Host] table
If specified, designates a ‘permanent’ host to
which the terminal will always be connected.
Optional
Link by input IP
Enable/
Disable
For users to enter the connection IP address
manually.
Optional
Secondary host IP
IP address or
the name
defined in the
[Host] table.
If specified, designates a secondary ‘permanent’
host to which the terminal will be connected.
Optional
Auto-login prompt
ogin:
Send ID information when this prompt is
received.
Optional
Password prompt
assword:
Send Password information when this prompt is
received
Optional
Login user name
Login ID
Optional
Login password
Login Password
Optional
Terminal type
ansi
Terminal type for outgoing connection
Optional
Inactivity time
0-99 minutes
Idle time before the port is disconnected
automatically. If set to 0 minutes, the port will
not disconnect.
Optional
