CAN Interface Board User’s Manual
Introduction
1-4
Product Features
The CAN interface board has the following features:
y
Supports CAN 2.0A and CAN 2.0B.
y
Two independent CAN controllers with DB9 connector.
y
CAN transfer rate up to 1 Mbps.
y
2 KV optical isolation protection.
y
LED indicator for transmit/receive status on each port.
y
Optional 120 ohm terminal resistor for CAN Interface Board networks.
y
DLL library and examples included.
y
Universal PCI board supports a 3.3 V or 5 V PCI bus signal. (CP-602U-I only)
y
Windows drivers provided.
Product Specifications
Hardware
CAN Controller
NXP SJA1000
CAN Transceiver
PCA82C251
CAN Specification
CAN 2.0 A/B
Signal Support
CAN_H, CAN_L, GND
Card Interface
CP-602U-I:
Universal PCI
CB-602I:
PC/104-Plus bus module
CP-602E-I:
PCI Express x 1
Connectors
CP-602U-I/CP-602E-I:
DB9 Male
CB-602I:
20-pin box header
Ports 2
Transfer Rate
1 Mbps
Terminator Resister
120 ohms (selected by jumper)
Max. Module Support
4 pcs
Driver Support
Windows 2000, XP/2003/Vista/2008 (x86 and x64), Windows 7
Library
C, C++, Visual Basic
Physical Characteristics
Dimensions
CP-602U-I:
120 x 80 mm ( 4.72” x 3.15” in)
CB-602I:
90 x 96 mm ( 3.54” x 3.78” in)
CP-602E-I:
120 x 80 mm ( 4.72” x 3.15” in)
Protection
Optical Isolation
2 KV
Environment Limits
Humidity (Operating)
5 to 95% RH
Operating Temperature
Standard Models: 0 to 55° C (32 to 131° F)
Wide Temp. Models: -40 to 85° C (-40 to 185° F)
Storage Temperature
-40 to 85° C (-40 to 185° F)
Regulatory Approvals
EN61000-3-3, IEC61000-4-2, IEC61000-4-3, IEC61000-4-4,
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-9622-Moxa-CP-602U-I.aspx
