- 7 -
Wall Mounting (optional)
For transportation applications that require an EN 50155 certification
report, we strongly recommend the purchase of the optional AWK-3131
wallmount kit, which has passed EN 50155 testing. This wallmount kit is
also convenient for other applications that require mounting the
AWK-3131 to a wall.
STEP 1:
Remove the aluminum
DIN-Rail attachment plate
from the AWK-3131, and
then attach the wall mount
plates with M3 screws, as
shown in the adjacent
diagrams.
STEP 2:
Mounting the AWK-3131 to a wall requires 3 screws.
Use the AWK-3131 device, with wall mount plates
attached, as a guide to mark the correct locations of
the 3 screws. The heads of the screws should be less
than 6.0 mm in diameter, and the shafts should be less
than 3.5 mm in diameter, as shown in the figure at the
right.
Do not screw the screws in all the way—leave a space
of about 2 mm to allow room for sliding the wall mount
panel between the wall and the screws.
NOTE
Test the screw head and shank size by inserting the screw into
one of the keyhole shaped apertures of the Wall Mounting Plates
before it is screwed into the wall.
STEP 3:
Once the screws are fixed into the wall,
insert the four screw heads through the
large opening of the keyhole-shaped
apertures, and then slide the AWK-3131
downwards, as indicated to the right.
Tighten the three screws for added
stability.
www.hypercable.fr
HYPERCABLE
