Mowox DYM100901, Original Instructions Manual

Page: 86 / 102

139
11. TROUBLESHOOTING
Problem Possible Cause Fault Fixing
Equipment does not
start
Battery is empty or not inserted
Check charge level, have re- pairs carried out
by a qualified electrician, if necessary
Safety key not inserted
Insert safety key
Defective start lever
Repair by customer services
Defective motor
Grass too long
Set larger cutting height
Lift the front wheels slightly by pressing down
on the handle bar.
Motor stops
Blockage by foreign object Remove the foreign object
Thermal cut out activated Allow motor to cool
Result unsatisfactory
or motor power drops
Cut height too low
Set a higher cut height
Blade blunt
Have the blade sharpened or replace it
Blade area blocked Clean the equipment
Blade assembled incorrectly Install the blade correctly
Strange noises,
rattling or vibrations
Blade screw loose
Tighten the blade screw
Blade damaged Replace the blade
Warning : Before performing any maintenance or cleaning work, always remove battery and pull put on-off button
or switch off the isolator key! Only with a stopped motor and standstill cutter..
CAUTION! Faults which can not be rectified with the aid of this table may be rectified by a specialist company
only (customer service centre).
12. Warranty
With the purchase of your lawnmower you have purchased our warranty for 24 months on manufacturing defects and
material defects. Scroll to the page in front of the table of contents for insight into the Mowox warranty conditions!
13. ENVIRONMENTALLY FRIENDLY DISPOSAL
According to EU directive 2012/19/EU on electric and electronic equipment and its
implementation into national law, all electric tools must be separately collected and
environmentally friendly recycled. Alternative disposal: If the owner of the power tool does not
return the tool to the manufacturer, he is responsible for proper disposal at a designated
collection point that prepares the device for recycling according to national recycling laws and