Repair Section
46
10)
Unfasten the two connectors (11-pin, 5-pin) from
the control panel.
11)
Remove the wiring harnesses from the clamp
and board clamp.
12)
Take out the seven (7) screws, and then remove
the left-side panel.
CAUTION
The screw (1*) on the front side of the left-side
panel differs from the rest. Ensure that the
correct screw is used when attaching the
left-side panel.
13)
Remove the two air filters from the right-side
panel.
14)
Take out the thirteen (13) screws, and then
remove the right-side panel.
CAUTION
The screw (1*) on the front side of the right-
side panel differs from the rest. Ensure that the
correct screw is used when attaching the
right-side panel.
I001749
Board Clamp
Clamp
Connectors
Upper Panel
Control Panel
I002614
Screw (1*)
Left Side Panel
Screws (6)
I001751
Air Filter
Air Filter
I002568
Screws (6)
Right Side Panel
Screws (6)
Screw (1*)
