Repair Section
44
8.2 Disassembly
1)
Remove the drain tank.
2)
Unfasten the two clips and the lower-side hook,
and then remove the front panel.
3)
Take out the eight (8) screws, and then remove
the two cooling air ducts.
4)
Take out the six (6) screws, and then remove the
service panel.
5)
Remove the two (2) power supply lines from the
terminal block, and remove the ground wire.
I002611
Cooling Air Duct
Screws (8)
Front Panel
Drain Tank
ILL00731-00
Screws (6)
Service Panel
ILL00732-00
Power
Supply
Lines (2)
Ground Wire
TB: Terminal
Block
