Notes:
1) When in the single flashlight/laser positioning function, it is common condition if there is
no vibration after press buttons.
2) In any mode, long press LED&laser light button“
” and unit will transfer to mode 4(all
lights go out).
3) The consequence of the mode circle is : mode 0->mode 1->mode 2->mode 3->mode
4->mode 0
9. Turn off and automatically turn off function
> In the standby mode, press power button“
” around two seconds, purple indicator flashes
and unit vibrates 3 times, unit will turn off.
> When microSD card is full, battery used up or standby mode for 3 minutes (time slot can be
set up), unit will shut down automatically.
10. MicroSD card error warning and unit turn off automatically
The warning system would start in the condition of not inserting microSD card, microSD card
damaged and microSD card full recording, and at the same time the purple indicator flashes
quickly with the fast rhythm vibration. The unit would turn off automatically 15 seconds later.
11. Low power warning and automatic shut down
During the system operation state, when built-in li-battery uses up, warning system will start.
Blue and red indicator alternate flash slowly and unit will be slow rhythm vibration, and then
turn off automatically 15 seconds later.
12. Downloading files and removable disk function
> Connect the unit to the computer USB slot.
> Press power button“
” to turn on the unit, and a removable disk will appear in "my
computer", you can view the pictures or videos, audio record files in the removable disk, and
you can also copy these files to your computer.
> When connected to computer with USB1.1 port, please copy the videos to your computer
desktop, and then replay it to avoid ragged playback.
Notes:
1) In this mode, you can short press LED/laser light button“
” to turn on flashlight function,
unit can be used as a USB table lamp.
2) When connect to the USB, if the yellow indicator flash, it means the unit is in the state of
power charging.
13. Power Charging
> Plug the AC adaptor into socket, and then connect with the camera for battery charging. The
yellow indicator will be constantly on during charging. Indicator goes out after the battery is
full charged. The charging time is about 3 hours.
> Unit also could get power charging through USB cable, when you connect the unit to
computer, it would be start the power charging function. To avoid extending charging time,
