Function specification
1. Starting up
> Insert microSD card, press power button“
” for 2 seconds. Purple LED indicator is lit up
with vibration. Unit enters into initialized state, please wait for a moment until the unit
vibrates again, purple LED indicator changed to blue, this means the unit enters into standby
mode.
> It may take a few seconds to enter into initialized state depending on capacity and load data
quantity of microSD card.
> For video resolution is HD 1080P, please use at least a brand high-speed (CLASS 4 or
above) microSD card to achieve better and more fluent video quality.
> In order to make the camera and TF card reach good compatibility, we suggest you to format
microSD card by TV setting when you use it first time because it won’t reach good
compatibility if format microSD card by PC. After format microSD card by TV setting, it can
avoid some situations, such as purple indicator flashes quickly warning or camera
automatically stops, etc
Notes: The purple indicator flashes quickly and unit will be fast rhythm vibration when turned
on without microSD card. Please turn off unit and insert microSD card again.(PDF
文档上没有
了
)
2. Mode transfer
In the condition of not connecting to AV&HDMI cable, the unit would automatically enter into
mode 1 after it turns on. Short press mode botton“
”, unit will circle in below 3 modes:
Mode1: Video recording standby mode, blue indicator will be constantly on.
Mode2: Photo taking standby mode, red indicator will be constantly on.
Mode3: Audio recording standby mode, purple indicator will be constantly on.
When connect to the AV&HDMI cable, the unit would enter into the mode 1 directly after it
turns on. Short press mode botton“
”, unit will circle in below 4 modes:
Mode1: Video recording standby mode, blue indicator will be constantly on.
Mode2: Photo taking standby mode, red indicator will be constantly on.
Mode3: Video and photo replaying mode, purple indicator is constantly on. (During this mode,
long press mode botton“
” and unit enters into next mode)
Mode4: Audio replaying mode, purple indicator is constantly on. (During this mode, long press
mode botton“
” and unit enters into next mode)
Notes:
1) The camera will vibrate once and mode indicator changes simultaneously after pressing
button, which means that operation is in effect, please don't press it again.
2) When operating mode button“
”, unit vibrates twice, which means unit transfer from
audio recording mode into video recording standby mode. Thus you can realize unit
enters into video recording standby mode even you couldn’t see indicator.
3) Unit can only enter into replaying mode after connecting AV&HDMI cable, otherwise this
