6
Operating the Digital Display Computer
Computer Button Functions
Push the button to turn on the display.
Push the button to select a function.
Push and hold the button for 3 seconds to reset
all functions except for the
T.REPS
function.
Computer Display Functions & Measuring Range
STOP
The unit is stopped.
AUTO START
Start motion or push button.
DISPLAY OFF
After approximately 4 minutes without operation.
Battery Replacement
Remove the display by using a slotted
screwdriver.
Remove the battery with a slotted
screwdriver. Replace with a new
3V lithium button cell battery.
8-level resistance control knob
The resistance can be adjusted by turning the resistance control knob.
To increase the resistance, turn the resistance control knob in a clockwise
direction. To decrease the resistance, turn the resistance control knob in a
counterclockwise direction.
Operating the Resistance Control Knob
How to use your OxyCycle 1 Pedal Exerciser.
When using the OxyCycle 1, the proper way to exercise is to set the desired resistance by
turning the resistance control knob, and then pedaling to get the best results. Pedaling at
excessive speeds or applying excessive force will damage the product or may cause injury to
persons. Please start exercising at a slow pedaling speed.
9
OPERATING THE DIGITAL DISPLAY COMPUTER
COMPUTER BUTTON FUNCTIONS:
Push the button to turn on the display.
Push the button to select a function.
Push and hold the button for 3 seconds to reset all
functions to zero except for the TOTAL REPS function.
COMPUTER DISPLAY FUNCTIONS &
MEASURING RANGE:
SCAN:
Automatically displays each function every 6
seconds.
SCAN
→
→
REP
→
→
TMR
→
→
T.REPS
→
→
CAL
→
→
KM
REP (0~9999):
Displays the number of time of rotation.
TMR (0:00~99:59):
Displays the exercise time.
T.REPS (0~9999):
Displays the number of total rotation.
CAL (0.0~999.9):
Displays the calories burned during exercise.
KM (0.0~199.9):
Displays the current training speed in kilometers per hour.
STOP:
The unit is stopped.
AUTO START:
Start motion or push button.
AUTO DISPLAY SHUT OFF:
After approximately 4 minutes without operation.
BATTERY REPLACEMENT:
Remove the battery
with a slotted
screwdriver.
Replace with a new
Button Cell Battery.
Remove the Computer
by using a slotted
screwdriver.
9
OPERATING THE DIGITAL DISPLAY COMPUTER
COMPUTER BUTTON FUNCTIONS:
Push the button to turn on the display.
Push the button to select a function.
Push and hold the button for 3 seconds to reset all
functions to zero except for the TOTAL REPS function.
COMPUTER DISPLAY FUNCTIONS &
MEASURING RANGE:
SCAN:
Automatically displays each function every 6
seconds.
SCAN
→
→
REP
→
→
TMR
→
→
T.REPS
→
→
CAL
→
→
KM
REP (0~9999):
Displays the number of time of rotation.
TMR (0:00~99:59):
Displays the exercise time.
T.REPS (0~9999):
Displays the number of total rotation.
CAL (0.0~999.9):
Displays the calories burned during exercise.
KM (0.0~199.9):
Displays the current training speed in kilometers per hour.
STOP:
The unit is stopped.
AUTO START:
Start motion or push button.
AUTO DISPLAY SHUT OFF:
After approximately 4 minutes without operation.
BATTERY REPLACEMENT:
Remove the battery
with a slotted
screwdriver.
Replace with a new
Button Cell Battery.
Remove the Computer
by using a slotted
screwdriver.
9
OPERATING THE DIGITAL DISPLAY COMPUTER
COMPUTER BUTTON FUNCTIONS:
Push the button to turn on the display.
Push the button to select a function.
Push and hold the button for 3 seconds to reset all
functions to zero except for the TOTAL REPS function.
COMPUTER DISPLAY FUNCTIONS &
MEASURING RANGE:
SCAN:
Automatically displays each function every 6
seconds.
SCAN
→
→
REP
→
→
TMR
→
→
T.REPS
→
→
CAL
→
→
KM
REP (0~9999):
Displays the number of time of rotation.
TMR (0:00~99:59):
Displays the exercise time.
T.REPS (0~9999):
Displays the number of total rotation.
CAL (0.0~999.9):
Displays the calories burned during exercise.
KM (0.0~199.9):
Displays the current training speed in kilometers per hour.
STOP:
The unit is stopped.
AUTO START:
Start motion or push button.
AUTO DISPLAY SHUT OFF:
After approximately 4 minutes without operation.
BATTERY REPLACEMENT:
Remove the battery
with a slotted
screwdriver.
Replace with a new
Button Cell Battery.
Remove the Computer
by using a slotted
screwdriver.
10
OPERATING THE TENSION CONTROL KNOB
TENSION CONTROL KNOB
The resistance can be adjusted by turning the
tension control knob. To increase the
resistance, turn the tension control knob in a
clockwise direction. To decrease the
resistance, turn the tension control knob in a
counterclockwise direction.
STORAGE PRECAUTIONS
Do not store the unit in any place where it will be subjected to high or low
temperature.
Do not expose to direct sunlight or outdoor for extended periods of time.
Do not store the unit in a humid or dusty area.
REPS
[0~9999]
Displays the number of time of rotation.
T.REPS
[0~9999]
Displays the number of total rotation.
Summary of Contents for OXYCYCLE 1
Page 44: ......
