Movement C5 INDOOR CYCLE, Owner'S Manual

Page: 56 / 118

EQUIPMENT ASSEMBLY
16
CAUTION!
Before starting to assemble the equipment, the following precautions must
be taken:
•
Make sure that the packaging is not damaged and that the parts and
components of the equipment are not damaged.
•
It is recommended that the equipment be unpacked where it will be
assembled.
•
The assembly site must be clean.
•
The option must be leveled to avoid equipment instability.
•
The space around the equipment should be free, as described in this
manual.
•
It is recommended that the equipment be mounted away from moisture
and out of sunlight to avoid damage to the electronic parts of the
equipment.
•
Be sure to carry out a survey of all parts included in the boxes. Check the
list of components to obtain a complete count of the number of parts
included for the correct assembly.
•
The icons have the function of instructing the user which tool to use, how
many people should perform the assembly or cross-tighten the screws in
the given step.
Allen wrench
n°5
n°6
Fixed wrench
M6
SCREW TIGHTENING TORQUE
SPECIFICATION TABLE
Di [mm] ameter Torque [N.m]
9-12
M8 22-29
M10 45-58
Mounting the equipment requires the following tools:
TOOLS
ICONS
50%
100%
Do not give
the
!
nal
tightening
of the screws
give the
!
nal tightening
of the screws
For this assembly it is
recommended that it
be done in two
people
phillips
screwdriver
SPACE
For the user's safety, we indicate the use
of a minimum access and escape area, as
shown in the picture to the right. The
access and escape area can be common
between the equipment used
wrenches and screws
60 cm
60 cm
60 cm
60 cm