Movax TAD30-2, User Manual, Page: 9 / 21

Master
page b
4.3 CONNECTING AUGER TO KELLY BAR
The auger is mounted into the telescopic kelly
bar with bolt-on adapter that is changeable for
different size and shape bars. This enables the use
of the augers with different connection standard.
Ask you Movax dealer for needed type adapter.
Following procedure is easy and safe way for
mounting the auger. Pay attention to safety, never
go between moving parts.
1. Make sure the adapter is firmly bolted to the
telescope kelly.
2. Lay the auger on the ground and support the
end against solid rest, track of the excavator in
example.
3. Line up the soil drill and the auger.
4. Rotate the auger or the telescope until the kelly
bar and the box are in same position. Note the
position of the locking pin and hole.
5. Use telescope to push the kelly bar into the
auger.
6. Install the locking pin(s).
USING MOVAX TAD – SOIL DRILL
9