Movax TAD30-2, User Manual, Page: 10 / 21

Master
page
4.4 POSITIONING FOR DRILLING
Lift the soil drill upright position and move to
wanted location of drilling. The telescope is ide-
ally in a shortest position at the beginning and
the elevator roughly halfway or lover position.
Then use the boom of the excavator to position
the end of the auger about half metre above the
ground. Alignment can be done by moving the
arm, the bucket cylinder of the excavator and tilt
function on the soil drill.
Movax soil drill can be used also for raked piles.
Drilling angle must not exeed 45 degrees thus
drilling on horizontal position is not allowed.
Rotation of the telescope in too big inclination
can cause a damage to the mechanism used to
drive the telescope.
Working range measured to the end of the
telescope and with 2000 mm long auger.
USING MOVAX TAD – SOIL DRILL
10