Master
page b
SAFETY AND WARRANTY
1. Movax operator must
be having an operator’s
certificate.
2. The soil drill has to
be connected to excava-
tor according to instruc-
tions. Note requirements
for hydraulic system of the
excavator and connections.
3. Maintenance has to be
performed according to the
instructions given in this
manual or Movax service
personnel.
4. Pressure relief valves
on a valve block on the soil
drill must not be set over
allowed maximum. Failing
to follow this may lead to
break down of telescope
lifting gear. Maximum
pressures are shown on a
hydraulic scheme on spare
part manual.
5. The soil drill should
be only used for soil drill-
ing purposes according to
instructions on this manual.
◊
Operator must be
trained for TAD soil drill
◊
Ensure there are no per-
sonnel in working area
◊
Obey safety instruc-
tions for excavator
◊
Check a connection
between the excavator and
the soil drill regularly and
always before use.
◊
Note stability and lift-
ing capability of the exca-
vator. It is recommendable
to avoid working sideways
to tracks.
◊
Avoid moving a boom
and an arm of the exca-
vator to positions where
accidental movement of
the excavator may cause
collision between soil drill
and cabin. Tilt the soil drill
away from cabin when lift-
ing it up or lowering down.
◊
Beware of drilled
bores in a ground. Bore is
weakening the surround-
ing ground and there is a
risk of falling into it. Never
leave open bores without
proper covering or isolat-
ing.
◊
Beware of over head
electric cables.
◊
Always check for
underground cables, pipes
and other structures before
drilling.
◊
Do not use the tel-
escope of the soil drill for
lifting.
◊
Lower the soil drill to
the ground before leaving
the cabin.
◊
Support and tie the soil
drill properly when loading
and transporting without
the excavator.
◊
Do not go under dril
when it is lifted.
◊
Beware that telescope
can slowly lower down
itself.
SAFETY AND WARRANTY
2.2 WARRANTY SAFETY
2.1 2.1 SAFETY
See general warranty condi-
tions for Movax products
(Appendix 1)
5