background image

12

QUARTZ CHRONOGRAPH 

1/1 OF A SECOND – TYPE A

Includes Movado BOLD large 43.5 mm and Series 800 Sub-Sea quartz chronographs

LEGEND:
H

 – Hour hand 

M

 – Minute hand 

S

 – Small seconds hand  

 

 

 

C

 – Chronograph 60-seconds counter 

E

 – Chronograph 30-minutes counter 

F

 – Chronograph 12-hours counter 

 

 

D

 – Date window 

 

 

 

 

1

2

3

 – Crown positions 

A

 – Chronograph push-button (start/stop)  

B

 – Chronograph push-button (split-time/reset)

These chronograph models feature a minute counter 
(up to 30), hour counter, and small seconds subdial; 
center-mounted chronograph seconds hand; and 
date or big date window. They can be used to time 
an event up to 12 hours in duration to the nearest 
second.  

TIME/DATE SETTING 

To set the time:

1.  Unlock screw-down crown on models with this feature. 

See “Screw-down Crown” for instructions.  

2.  Pull crown out to position 3; watch stops.
3.  Turn crown in either direction until hands indicate 

desired time.

4. Push crown back in to position 1; watch restarts.
5.  Screw crown back into case on models with screw-

down crown. 

To adjust the time to the exact second:   

1. Unlock crown on models with screw-down crown.
2.  As soon as small seconds hand 

S

 reaches <<60>> 

position, pull crown out to position 3; watch stops. 

3.  Turn crown to move hands and set time, making sure 

date changes at midnight, not noon.  

4.  Move hands slightly ahead of exact time, then slowly 

turn crown counterclockwise to align minute hand 
with correct minute marker. 

5.  Take an accurate time signal (from a radio news 

station, for example). When audible tone signals 
exact time, immediately push crown back in to 
position 1; watch restarts, now set to the exact time. 

6.  Screw crown back down into case on models with 

screw-down crown.

To correct the date (quick mode)

:  

1.  Pull unlocked crown out to position 2; watch continues 

to run. 

2.  Turn crown clockwise until correct date appears in 

window 

D

3.  Push crown back in to position 1 and screw back 

down into case. 

FIGURE A

FIGURE B

Summary of Contents for 800 series Sub-Sea


















































Reviews: