Movado 800 series Sub-Sea Operating Instructions Warranty & Service Manual Download

Page: 45 / 49

Many Movado sport watches and chronographs are equipped with a special screw-down crown that helps seal

the case against water and moisture. Before attempting to set the time or date, you must first unlock the screw-down

crown by turning it counterclockwise until it loosens (approximately six rotations).

After your watch has been set to the correct time and date following the instructions provided, the crown must be

screwed back down into the case to ensure water resistance:

1. Return the crown to position 1, flush against case.

2. Turn the crown clockwise while gently pressing in on it.

3. Continue to turn the crown until you feel resistance. Do not over-tighten.

SCREW-DOWN CROWN

Summary of Contents for 800 series Sub-Sea


















































Search results

Summary of Contents for 800 series Sub-Sea

Reviews:

Related manuals for 800 series Sub-Sea

Brands by name

Popular brands

Movado 800 series Sub-Sea, Operating Instructions Warranty & Service Manual

Search results

Summary of Contents for 800 series Sub-Sea

Reviews:

Related manuals for 800 series Sub-Sea

Brands by name

Popular brands