- -
BIOS
Soft-Off by PWR-BTTN
It defines the power-off mode when using an ATX power supply.
In the Instant Off mode, It allows powering off immediately upon pressing the
power button.
In the Delay Sec mode, the system powers off when the power button is
pressed for more than seconds or enters the suspend mode when pressed
for less than seconds.
Setting: Instant-off (Default), Delay Sec. .
Power On Control>>>
PWRON After PWR-Fail
It sets the system power status whether on or off when power returns to the
system from a power failure situation.
Setting: Off (Default), On, Former-Sts.
Power On by Ring
It enables or disables the power on of the system through the modem
connected or LAN.
Setting: Disabled (Default), Enabled.
Resume by Alarm
It enables or disables the resumption of the system operation. When
enabled, the user is allowed to set the Date and Time.
Setting: Disabled (Default), Enabled.
Wake-Up by PCI Card
It allows the system to wake up from a signal received from a PCI card such
as a LAN card.
Setting: Disabled (Default), Enabled.
Summary of Contents for EmCORE-i9457
