Mouser EmCORE-i9457, User Manual

Page: 30 / 68

- 26 -
Installation
ATX1: ATX Power Supply Connector (23)
The ATX power supply has a single lead connector with a clip on one side
of the plastic housing. There is only one way to plug the lead into the ATX
power connector. Press the lead connector down until the clip snaps into
place and secures the lead onto the connector.
Pin Description Pin Description
1 6
5 10
6 VSB PS-ON
7 +V 2 GND
8 +V GND
9 N/C +2V
0 GND +.V
Warning
Incorrect installation of the power supply could result in serious damage to
the mainboard and connected peripherals. Make sure the power supply is
unplugged from the AC outlet before connecting the leads from the power
supply.
CPUF1: CPU Fan Power Connector (24)
CPUF is -pin header for the system fan. The fan must be a +2V fan.
Pin Description
1
2
3
GND
2 +2V
FAN_Detect