BFA-Series & NFA-Series Operation Instructions
Corporate Headquarters:
1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com
Page 14
The EZ-Glider torque arms are designed to improve production and quality control during the assembly
process. The arms securely keep electric or pneumatic drivers in perpendicular alignment to help prevent
side loading or cross threading occurring during the assembly process. The EZ-Glider helps remove the
operator’s influence in the assembly process and strengthens quality control.
The ergonomic design of the EZ-Glider torque arms reduces RMI (repetitive motion injury) and CTS
(carpal tunnel syndrome). The effortless handling of the torque arm provides comfortable tool operation
and increased production. The torque arm can be installed in space-restricted areas
Accessories
Scout screw counter helps manufacturers detect and eliminate costly screw-fastening
errors during the assembly process. Using a screw counter is like putting the eyes and
ears of a quality control manager where they are needed most - right on the assembly
area. The scout is designed to detect cross threading, omissions, unfinished rundowns
and cycle complete. The screw counter takes the control of the assembly process out
of the operator's hands.
Item # 145790
Screw presenters are small, tabletop devices used to organize and automate work
areas and production cells. Screw presenters make assemblers and the assembly
process more efficient by mechanically presenting a screw to a fixed pick up point.
The inexpensive screw presenter is an alternative tool instead of the cumbersome
and very expensive screwfeeder systems.
Vacuum Adapter Kit
For: BFA060, BFA080, BFA120 models
Item # 145612
For: NFA models
Item # 145864
Vacuum adapter kits can be mounted on an electric screwdriver. The screwdriver is fitted with a suction head that holds the screw on
the bit, enabling the operator to pick it up with the tool itself. This is an effective, time saving device that works with most fasteners.
- Accepts different size screws and various length fasteners.
- Allows quick-change set-up at a low cost.
- Mounts with threaded torque nut. The driver remains externally adjustable while allowing semi-automatic pickup of non-ferrous
fasteners.
- Plug driver into vacuum supply or chose the Vacuum Ejector.
- Mouthpiece and bit purchased separately.
