Mountfield Levita PW 100, Operation Manual, Page: 8 / 44

- WARNING : High pressure jets can be dangerous if subject to misuse. The jet must not be directed at
persons, live electrical equipment or the appliance itself.
- Do not direct the jet against yourself or others in order to clean clothes or foot-wear.
- Risk of explosion – Do not spray flammable liquids.
- Disconnect from the electrical power supply before carrying out user maintenance .
- High pressure cleaners shall not be used by children or untrained personnel.
- To ensure appliance safety, use only original spare parts from the manufacturer or approved by the
manufacturer.
- WARNING : Water that has flown through backflow preventers is considered to be non-potable.
- WARNING : The machine shall be disconnected from its power source during cleaning or
maintenance and when replacing parts for mains operated machines by removing the plug from the
socket-outlet;
- WARNING : High pressure hoses, fittings and couplings are important for safety of the appliance. Use
only hoses, fittings and couplings recommended by the manufacturer.
- Do not use the appliance if a supply cord or important parts of the appliance are damaged, e.g. safety
devices, high pressure hoses, trigger gun.
- WARNING : If an extension cord is used, the plug and socket must be of watertight construction.
- WARNING : Inadequate extension cords can be dangerous.
_
This high pressure washer must not be used at temperatures below 0°C.
WARNING!
- Cord on drums should always be completely unwind to prevent the cord from overheating. - If an
extension cord is used, the plug and socket must be of watertight construction.
- Inadequate extension cords can be dangerous.
- comply with the below-mentioned requirements for length and cord dimensions.
1.0 mm² max. 12.5 m
1.5 mm² max. 20 m
2.5 mm² max. 30 m
Power cord connections should be kept dry and off the ground.
_
If the power cord is damaged, it must be replaced by the manufacturer or his service agent or similarly
qualified person in order to avoid a hazard.
All keep the machine on a stable and flat surface during operation, handling, transportation and storage.
Sudden overturn of machine will cause injury to body.
In the event of accident or breakdown, switch off the machine immediately. (e.g. contact with detergent:
rinse with an abundance of clean water)
Attention!
Through poor conditions of the electrical MAINS, shortly voltage drops can appear when starting the
EQUIPMENT. This can influence other equipment (eg. Blinking of a lamp). If the MAINS-IMPEDANCE
Zmax < 0.335 OHM, such disturbances are not expected. (In case of need, you may contact you local
supply authority for further information.)
6