35. Slide the hatch in place, and
secure in place with 2 of the #2x
1
4
" screws. Do NOT overtighten
the screws. Take out the screws,
remove the hatch, and reinforce
the threaded holes with thin CA.
36. Glue the
3
32
" balsa FH6 parts
onto the
1
16
" plywood FH9 parts,
making sure to line up the slots
in the bottom. Make a RIGHT
and LEFT version, as shown in
the image.
37. Glue the
3
32
" Balsa FH1 and FH1a parts together,
using thin CA.
38. Glue the
1
32
" Ply FH3 and
1
16
" Balsa FH3 parts
together, using thick CA and
1
8
" dowel to align the
parts.
39. Dry assemble FH1, FH2, FH3, and the FH6/FH9
assembly with the plywood on FH9 facing OUTSIDE.
16