Page 4
PREMISE PRO Digital Surveillance Camera
1 PHOTO
A single still photo is taken when movement is detected. Photos are stored in the DCIM/100MFCAM
folder on the SD card.
3 PHOTO
Three still photos are taken when movement is detected in a sequential manner with an approximate
1 second interval between images. Photos are stored in the DCIM/100MFCAM folder on the SD card.
VIDEO
Camera records a video when movement is detected by the motion sensor. The video length is
configurable in OPTIONS.
Page 9
PREMISE PRO Digital Surveillance Camera
When the camera’s power is turned ON, the display will come on to the Default Screen. Moving
clockwise from the top left, information is displayed for capture type, delay countdown for capture,
image count/remaining capacity, and battery level. If no buttons are pressed within 30 seconds, the
LCD screen will enter sleep mode to conserve battery life and enter capture mode based on current
settings. To wake the camera manually, press and hold the menu button until you see the default
screen on the display.
PHOTO DLY:00:29
B:99% 9999/9999
TRACE PREMISE
<OPTIONS START>
Setup Selection Setting
From the Default Screen, press the Menu button to enter the Main Screen. Press the Left button
to enter OPTIONS or Right button to START and force the camera to countdown and enter capture
mode. In the OPTIONS menu, Press the OK button, the selection will start to flash. Press the Up/Down
buttons to change the settings. Press the OK button again to Iock in selection. Press the Left button to
move to the next setting. Using this method you can customize your camera’s feature settings.
From this Main Screen, press OK to get to the Test Capture screen.
The PREMISE PRO offers three capture modes as described below. The default capture mode is 3 PHOTO.
Memory & Storage
Your camera supports external SD memory cards ONLY and will accept up to a 32GB card
(Class 4 or higher). Using large memory cards can slow the camera response. The camera
cannot capture any photo or video without external memory. Please insert an SD memory card
to operate camera. Estimates are based on the most common types of memory cards that can be
purchased at electronic stores, office supply stores, or online. Estimates may vary based on camera
settings or environmental conditions.
Important
Always turn the unit off when inserting or removing an SD memory card to avoid damage and ensure
that the camera properly updates the memory information.
Actual capacity will vary based on image properties.
CAMERA SPECIFICATIONS
F
Specifications
Operational Mode
Photo / Video
Resolution
12.0 MP
Still Resolutions
JPEG
Low 2688 x 1512
High 4608 x 2592
Video Resolutions
VGA- 640 x 480
HD 1280 x 720
SD Memory Card
Up to 32 GB SD card, Class 4 or higher (not included)
Format
JPEG - Still pictures, AVI - Video clips
Power Supply
8 AA Alkaline or Lithium batteries (not included)
Photo Mode
SD Card Size:
2 GB
16 GB
HIGH 4608 x 2592
1300
10400
LOW 2688 x 1512
3800
30400
Video Mode
SD Card Size:
2 GB
16 GB
HD 1280 x 720 (based on 10 sec video)
110
880
VGA 640 x 480 (based on 10 sec video)
310
2480
CAPTURE MODES
D
SETUP AND PROGRAMMING
E
