background image

IRAIM / ON / OFF

IR Aim - 

When IR Aim is ON and the PIR sensor detects motion, the red LED on the front of the camera 

will come on for 2 seconds and then shut off.

MENU BUTTON

The Menu Button selects Camera Setup or Main Screen. When camera mode is selected, the LEFT and 

RIGHT buttons navigate through the menu options. The Menu Button is also used to wake-up the 

camera and turn on the display when the camera is in power saving (or sleep) mode.

OK, UP/DOWN and LEFT/RIGHT BUTTONS

The OK button selects the item to be changed. The UP/DOWN and LEFT/RIGHT buttons are used to 

step through the menu options. Pressing the OK button again, selects the option indicated on the 

display. The OK button is also used to manually take a picture.

BATTERY COMPARTMENT

The camera is powered by six (6) C-cell alkaline batteries. Push the battery compartment release 

button to eject the battery tray. Install batteries as indicated on the engravings on the battery tray, 

taking care to note the correct polarity.

See Important Battery Information section on the back page of this manual.

SD CARD SLOT

Accepts up to a 32GB SD Card for photo and video storage.

NOTE:

 

An SD Card must be installed for the camera to operate (sold separately).

USB PORT

Download still pictures and video onto your computer by connecting a USB cable (sold separately) 

to the USB port.

EXTERNAL POWER PORT

Accepts the Moultrie PowerPanel or Moultrie Battery Box accessories (sold separately) only. 

Refer to 

www.moultriefeeders.com

 for more information.

Using a Tree Mount

The camera can also be mounted directly to a

tree using a mounting bracket that attaches

directly to a tree or pole. Strap the tree mount

to the tree and secure, then attach the camera

to the tree mount using the tree mount socket

located on the back of the camera.

Using the Moultrie Camera Power Panel

Place near the tree where the camera is mounted. 

Place for best exposure to sun. To attach to a 

tripod secure the power panel to the tripod 

angled upward for best exposure. Plug the power 

panel to the Power Panel Plug. This will extend the 

life of your camera in the field.

Note:

 Leave internal batteries in the camera

during use. The Camera Power Panel needs 

4 hours of sunlight to fully power the camera.

Using the Moultrie Battery Box

Extend the field life of your Moultrie camera with a 

long-lasting, rechargeable external power source. 

Place near the tree where the camera is mounted. 

Plug the Battery Box to the Power Panel Plug.

This will extend the life of your camera in the field.

CAMERA OVERVIEW (cont.)

I

MOULTRIE ACCESSORIES

X

Page 2

D-333 Digital Game Camera

Page 15

D-333 Digital Game Camera

Summary of Contents for D-333









Reviews: