To unlock the blades (D) from the
spindle (C):
• Place the bowl assembly on a stable
flat worktop.
• Carefully lift the blade (D) off the
spindle (C).
Usage and practical tips
Blending
• Turn the speed selector (A5) to
position “2” to start the appliance.
You can blend up to 1 litre of soup or
stewed fruit in 20 sec.
Chopping
• Turn the speed selector (A5) to
position “2” to start the appliance or,
for better control over the chopping,
use the “pulse” position.
• In 15 to 30 sec., you can chop up to
600g of food:
• hard produce: cheese, dried fruits,
certain vegetables (carrots, celery...).
• soft produce: certain vegetables
(onions, spinach...).
• raw or cooked meat (boned with
gristle removed and diced).
• raw or cooked fish...
KNEADING/MIXING
• Turn the speed selector (A5) to
position “2” to start the appliance.
• When kneading, stop the appliance
as soon as the pastry/dough starts to
form a ball.
You can:
• knead up to 1.2 kg of pastry/dough
(biscuit, shortcrust, and bread) in
approximately 60 sec.
• mix up to 1 litre of pancake, waffle
batter, etc. in 1min to 1
1
/
2
min.
• mix up to 1.5 kg of light cake
mixture (biscuit, sponge) in 1
1
/
2
min
to 3
1
/
2
min.
MIXING/BLENDING/CHOPPING/
KNEADING - (DIAGRAM 2)
Accessories used (depending
on model)
• Bowl assembly (B), spindle (C) and
blades (D):
• Metal blade (D1) for mixing or chopping.
• Plastic kneading blade (D2) for kneading
or blending, pastry and cake making
Fitting the Bowl
Press the release button (A4) to open
the Liquidiser drive cover (A1).
• Fit the bowl (B3) on the Bowl
accessory drive (A3).
• Fit the spindle (C) on to the
bowl drive (B3a).
• Slide the metal blade (D1) or the
plastic kneading blade (D2) onto the
spindle (C), pushing it down to the
bottom of the bowl.
• Put the ingredients in the bowl.
• Fit the lid (B2) on the bowl.
• Close the Liquidiser drive cover (A1).
You should hear an audible click.
Note: If the lid and handle are not
correctly fitted on to the bowl, the
appliance will not start.
2
2
1
FUNCTIONS OF YOUR FOOD PROCESSOR
Fitting/Dismantling the bowl
handle (B4) and the liquidiser jug
handle (
I
4)
For ease of cleaning and storage, the
bowl handle (B4) and liquidiser jug
handle (
I
4) are detachable.
• To fit the handle, position it against
the lugs of the bowl/jug.
• Slide the handle upwards until
it clicks.
• To detach the handle, press the
release button (B4a) or (
I
4a) and slide
the handle downwards.
FITTING DETACHABLE PARTS
Assembling/Dismantling the bowl
(B3) - (diagram 1)
The bowl can be used with the following
accessories (depending on model):
Blades (D), grating/slicing discs (E),
whisk (F), emulsifying disc (G), citrus
press (H), juice extractor (J).
• If not already in position, fit the rubber
seal (B3c) in the bottom of the bowl.
Ensure that the thin lip of the seal
faces upwards.
• Fit the drive (B3a).
• Fit the nut (B3b) and tighten it to lock
the assembly.
• Dismantle the assembly for cleaning
after each use.
(Note: Whether you are using the Liquidiser jug (
l
3) or the bowl (B3) you will
need to ensure that the respective handle and lid have been fitted correctly.)
ASSEMBLING AND DISMANTLING THE BOWL
1
6
5
B3b
B3a
B4a
B3c
