Motus M660BR, Service Manual

Page: 21 / 96

20
1) Remove the SEAT ASSEMBLY (15) from the GAS
CYLINDER (38) by unscrewing four setscrews (16).
2) Remove the SEAT POST CAP (56).
3) Remove the MAIN BODY CAP (54) from the MAIN
BODY by unscrewing two screws (55).
4) Remove four setscrews (39) securing the GAS
CYLINDER (38) to the MAIN FRAME (39).
5) Install new GAS CYLINDER in reverse order.
2.7. How to Replace the PEDAL
2.7.1. Left PEDAL
The picture shown is the left Pedal as viewed from the
rear side of the bike.
1) Turn the connecting section in between the
PEDAL_L and CRANK ARM_L clockwise as shown in
picture by using Adjustable Spanner or Spanner while
holding the CRANK ARM_L.
2) Turn the PEDAL_L until it is distracted.
3) Discard the PEDAL_L and install new PEDAL_L in
reverse order.
2.7.2 Right Pedal
The picture shown is the Right Pedal as viewed from
the rear side of the bike.
1) Turn the connecting section in between the
PEDAL_R and CRANK ARM_R counterclockwise as
shown in picture by using Adjustable Spanner or
Spanner while holding the CRANK ARM_R.
2) Turn the PEDAL_R until it is distracted.
3) Discard the PEDAL_R and install new PEDAL_R in
reverse order.