16
2.3.2 M660BR/BRL
Do the steps below while referring to the following Exploded Views in Appendix.
I.1 M660BR/BRL_MAIN BODY
1) Turn off the unit power at the switch and then unplug the line cord at wall outlet.
2) Remove the CENTER FOOT_RE (59) by removing two bolts (56) securing the CENTER
FOOT_RE (59) to the Main Body Frame.
3) Remove two bolts (50) securing the FRONT BODY CAP_FRONT/REAR (58, 57) to the Main
Body Frame and remove the FRONT BODY CAP_FRONT/REAR (58, 57).
4) Remove six bolts (46, 56) fastening the FRONT BODY_R (54) to the Body Frame and
remove the FRONT BODY_R (54) from the Body Frame.
5) Replace the Pedal Shaft while referring to 6) thru 19) in section
2.3.1 M660BU/BUL
.
6) Re-install all of parts in reverse order.
2.4. How to Replace the GENERATOR
2.4.1 M660BU/BUL
Do the steps below while referring to the following Exploded Views in Appendix.
C.1 M660BU/BUL_MAIN BODY
1) Turn off the unit power at the switch and then unplug the line cord at wall outlet.
2) Remove the CENTER FOOT_UP (61) by removing two bolts (52) securing the CENTER
FOOT_UP (61) to the Main Body Frame.
3) Remove two bolts (55) securing MAIN BODY CAP (54) to the Main Body Frame.
4) Lift the MAIN BODY CAP (54) and SEAT POST CAP (56) and then fix these to the Gas
Cylinder temporarily by a tape to make it easy to remove the MAIN BODY_R (50).
5) Remove five bolts (51, 52) securing the MAIN BODY_R (50) to the Main Body Frame and
remove the MAIN BODY_R (50).
Summary of Contents for M660BR
