This page will show you where to find safety labels on your dirt bike.
You will find that some labels warn you of potential hazards. Others will
provide important safety and maintenance information. Please read
them carefully and do not remove them. If your label wears off or
becomes hard to read, contact Motovox for a replacement.
When you operate a dirt bike you need to be able to operate the throttle,
brakes and other controls without stopping to look at them. Please study
the image below carefully to become familiar with the function and the
location of each control.
Engine Kill Switch
Front Brake Lever
Throttle
IMPORTANT SAFETY INFORMATION
OPERATING CONTROLS
7
6
SAFETY MESSAGES
Your MVX70 dirt bike is shipped with the handlebars NOT
bolted on.
To attach the handlebars follow these steps:
1. After unpacking your dirt bike, stand it on the kick stand on a level surface.
2. Locate the handlebar mounting bolts at the
bottom of the handlebar assembly.
3. Remove the locking nuts and washers from the
handlebar mounting bolts and set aside.
3. Insert bolts into holes in upper triple clamp.
4. From underneath, put washers and locking
nuts onto bolts (pictured at right).
5. Tighten securely.
ATTACHING THE HANDLEBARS
Mounting bolts and lock nuts.
TROUBLE
?
DO NOT RETURN TO STORE
contact us!
888-488-MOTO (6686)
or email [email protected]
Summary of Contents for MVX70
Page 26: ......
