6 Wiring of the Device
26
Rev. 08/2018
Replacing VariStep and VariStep3
Pin assignment of connectors is identical for the VariStep and VariStep3
stepper motor drivers except for the connector
Analog Inputs/Outputs
. The
identical plugs can simply be plugged from the old device into the new
device. This also applies to
CAN
and
Modbus (RS485)
interfaces.
The socket for the stepper motor and encoder for the VariStep3 stepper
motor driver has 12 poles. However, the 11-pole plug can still be used. It just
needs to be plugged in at the far right. Pin 0 of the socket is currently not in
use and therefore locked.
When changing the plug for the power supply, be aware that Earth and
negative pole (–) must be connected separately on the VariStep3.
Summary of Contents for VariStep3
Page 1: ...VariStep3 Stepper Motor Driver Operating Manual P N 01 50 020 EN Rev 08 2018...
Page 16: ...4 Product Description 16 Rev 08 2018...
Page 91: ...Rev 08 2018 91...
Page 92: ......
