66
Rev. 07/2013
9.1
Firmware Update
Using the MOTORTECH Flash Tool, you can perform a firmware update for the control unit. The
provided CD-ROM comprises this program.
Install MOTORTECH Flash Tool
This is how to install the MOTORTECH Flash Tool:
1.
Start the installation.
–
Insert the CD-ROM into the CD/DVD drive of your PC. If the Autorun feature is enabled for
the drive, cancel the installation program for the
MOTORTECH Integrated Configuration
Tool
.
–
Copy the file
MOTORTECHFlashTool-x.x.x.zip
(e. g.
MOTORTECHFlashTool-0.8.3.zip
) onto
your PC.
–
Unzip the file.
–
Start the installation process by running the
setup.exe
file.
2.
Install the program.
Follow the instructions of the installation routine. Please note that the license agreement
terms must be accepted before using the MOTORTECH Flash Tool. If the terms are not
accepted, the installation cannot continue.
3.
If not already done, install the USB driver by running the file
CDMxxxxx_Setup.exe
(e. g.
CDM20824_Setup.exe
)
from the CD-ROM.
▸
The MOTORTECH Flash Tool is now set up. You can connect your PC to the control unit via
the USB interface.
9 OPERATION
