2 SAFETY INSTRUCTIONS
10
Rev. 07/2013
Risk of destruction due to electrostatic discharge!
The VariStep stepper motor card may only be installed by specialized
personnel who has been trained in handling ESD sensitive components and
with due regard to relevant ESD standards. It must be installed into a
control cabinet, and it is necessary to comply with the ESD standard
DIN EN 61340-5-1; VDE 0300-5-1:2008-07.
Damages caused by electrostatic discharge are not covered by the
guarantee.
Risk of burning!
The surfaces of the system may heat up to high temperatures.
Risk of damage!
The stepper motor of the VariFuel2 is not suitable for carrying or lifting a
gas mixer. There is a danger that the stepper motor could break, and if the
gas mixer were to fall, it could result in injury or property damage.
Always carry or lift the gas mixer by its exterior housing.
2.4
Proper Disposal
After the expiration of its service life, MOTORTECH equipment can be disposed of with other
commercial waste, or it may be returned to MOTORTECH. We will ensure its environmentally
friendly disposal.
