Motorola XT180, Owner'S Manual

Page: 9 / 176

7
English
Set Group Code
1. or to choose the Group Code.
2. SEL / to complete Group Code setting.
3. The radio enters “Ring Tone Setting Menu”
4.
MENU/GRP to back to Group Menu.
Set Ring Tone
The user can select the Ring Tone for a Direct Call. Ring Tones
are the same as Call Tones.
1.
or to select a Ring Tone.
2. The selected Ring Tone sounds.
Set ID
Each radio in the group needs to be set with an ID. The user
can set an ID name of up to four (4) characters.
1.
or to select an ID number.
2. If the ID is already taken, USED is seen. If USED is not
shown, then the ID is available.
3. SEL / to advance to setting ID Name.
Set ID Name
The ID Name appears on the other radio’s display when you
make an All Call or a Direct Call. The ID Name will also on the
other radio’s display when they are placing a Direct Call. When
no ID name is set, the unit number appears.
1.
or to select a character that will blink on the display.
2. SEL / to select and move to the next character.
3. SEL / to register the ID number and ID Name.
Note: The radio cancels selected ID Number and entered ID
Name, then exits from Group Menu when MENU/GRP
button is pressed.
Channel Setting in Group Mode
To set Auto Channel Change in Group Mode:
1.
MENU/GRP to enter Group Mode.
2. SEL / to enter Channel Setting.
3. or to “Auto Channel Change Setting”.
4. SEL / to select.
A channel number will blink and “ALL” is seen.
5. or to select the channel.
6. SEL / or to transmit Auto Channel Change command.
7. MENU/GRP to return to Channel Setting in Group Mode.
To set Manual Channel in Group Mode:
1.
MENU/GRP to enter Group Mode.
2. SEL / to enter Channel Setting.
3. or to “Manual Channel Setting”.
4. SEL / to select.
A channel number will blink and “MY” is seen.
5. or to select the channel manually.
6. SEL / to exit from Manual Channel setting.
7. MENU/GRP to return to Channel Setting in Group Mode.
Set All Call
1. MENU/GRP to enter Group Mode.
2. to enter All/ Direct Call Setting.
3. or to select All Call Transmission. “SYNC” is seen.
4. SEL / or to exit this setting, and transmit All Call.
All Call Tone sounds. and blinks while transmitting.
5. MENU/GRP to exit.