Motorola XT180, Owner'S Manual

Page: 7 / 176

5
English
Selecting a Channel and a Sub-Code
To select a Channel:
1.
SEL / button to enter Select Menu. Advance until the
Channel indicator blinks.
2. or to the required channel.
To select a Sub-code :
1.
SEL / button to enter Select Menu. Advance until the
Sub-code indicator blinks.
2. or to the required Sub-code.
3. Exit the Select Menu.
Select Menu
Your radio navigates through the Select Menu as follows:
Voice Operated Transmission (VOX)
Transmission is initiated by speaking into the microphone of
radio instead of the pushing the
PTT button.
To select the VOX level:
1.
MENU/GRP button to enter Common Menu. Advance and
select “VOX”.
2. SEL / to select.
3. or to the desired VOX sensitivity level.
4. Exit the Select Menu.
Note: Level “N”(OFF) disables VOX. Levels 1-5 set the
sensitivity of the VOX circuit.Use level 1 in quiet
environments, and use level 5 in very noisy
environments. You can find the appropriate
sensitivity level by speaking into the microphone. If
the flashes, your voice is accepted.
Transmitting a Call Tone
Your radio is equipped with 10 selectable call tones .
To select a call tone:
1.
MENU/GRP button to enter Common Menu. Advance to
“TONE”.
2. SEL / to select.
3. or to the desired call tone.
4. Exit the Common Menu.
To transmit the selected call tone :
1. to transmit the selected call tone. The selected tone will
automatically be transmitted for a fixed length of time.
2. PTT to cancel Call Tone.
Auto Power Off
Auto Power Off feature allows you to set the time that the radio
turns off automatically.
1.
MENU/GRP button to enter Common Menu. Advance until
“PWR” and the current Auto Power Off time blinks.
2. SEL / to select.
3. or to select the time from ON, 1H, 2H, and 3H.
4. Exit the Menu.
Normal
Channel Sub-code
1 - 8 0 - 121