background image

Section 5 

Glossary

 

5-8  

WN825

PING 

A network utility that tests host reachability by sending a small 
packet to the host and waiting for a reply. If you PING a computer 
IP address and receive a reply, you know the computer is 
reachable over the network. It also stands for “Packet Internet 
Groper.” 

Port Triggering 

A mechanism that allows incoming communication with specified 
applications.  

PPP 

Point-to-Point Protocol is used to transport other protocols, 
typically for simple links over serial lines. It is most commonly 
used to access the Internet with a dial-up modem. 

PPPoE 

Point-to-Point Protocol over Ethernet.  Used by many DSL 
Internet Service Providers for broadband connection. 

PPTP 

Point-to-Point Tunneling Protocol encapsulates other protocols. It 
is a new technology to create VPNs developed jointly by several 
vendors. 

Private IP Address 

An IP address assigned to a computer on the LAN by the DHCP 
server for a specified lease time. Private IP addresses are 
invisible to devices on the Internet. See also 

Public IP Address

Protocol 

A formal set of rules and conventions for exchanging data. 
Different computer types (for example PC, UNIX

®

, or mainframe) 

can communicate if they support common protocols. 

Public IP Address 

The IP address assigned by the service provider. A public IP 
address is visible to devices on the Internet. See also 

Private IP 

Address

RJ-11 

The most common type of connector for household or office 
phones. 

RJ-45 

An 8-pin modular connector; the most common connector type for 
10Base-T or 100Base-T Ethernet networks. 

 

Summary of Contents for WN825




























































Reviews: