Troubleshooting
Section 4
WN825
4-3
Software Solutions
How do I enable LEAP for my corporate network?
Ask you system administrator for the
Domain/Username
and
Password
required.
1
Right-click the
antenna icon
in the system tray and select
Open Utility
. The Motorola
Wireless Configuration Utility window displays.
2
Ensure that the Motorola Wireless Configuration utility is enabled, refer to Section 3 for
further details.
3
Add a new network, refer to Section 3 for details.
4
In the Preferred networks area, highlight the
network
you want to configure.
5
In the Available networks area click
Configure,
or in the Preferred networks area click
Properties
.
6
Select the type of authentication required, in this case CCX. Match the authentication
used by the access point.
7
Click the
Authentication
tab to enter further details.
– Enter
the
Domain/Username
and
Password
.
8
Click
OK
twice to save your changes.
I am unable to roam with WDS enabled.
Currently WDS cannot work with WPA enabled. Use WEP for data encryption instead.
