6809509A89-O
March 01, 2007
29
Level 1 and 2 Service Manual
Disassembly
12.
Remove the CLI dispaly from the Flip pcb.
13.
To replace the CLI display, insert the CLI flex into the ZIF connector & close the latch.
14.
Properly align the CLI display onto the bracket & press down on the CLI flex to ensure
proper contact.
15.
Paste a new kapton tape across the CLI flex & ZIF connector.
16.
To replace the main display lens, properly align the display lens on the bracket.
17.
Align the display flex to the flex connector & gently press it downwards for proper contact.
Figure 18. Removing the Display Module Lens
➧
A new adhesive strip might be required for proper securing of the CLI Flex in place on the
Flip pcb.
Summary of Contents for W510
Page 4: ...ii March 01 2007 Contents ...
Page 48: ...44 March 01 2007 6809509A89 O Troubleshooting ...
Page 51: ......
Page 52: ......
