Motorola VLR 150 User Manual Download Page 70

Page: 70 / 76

IV. Software

• Products Covered

Software. Applies only to physical defects in the media that embodies the copy of the

Software (e.g. CDROM or floppy disk).

• Length of Coverage

Ninety (90) days from the date of purchase.

Software (Exclusion

• Software Embodied in Physical Media

No warranty is made that the software will meet your requirements or will work in

combination with any hardware or software applications provided by third parties, that the

operation of the software products will be uninterrupted or error free, or that all defects in the

software products will be corrected.

• Software NOT Embodied in Physical Media

Software that is not embodied in physical media (e.g. software that is downloaded from the

internet), is provided “as is” and without warranty.

VI. Who is Covered?

This warranty extends only to the first consumer purchaser, and is not transferable.

6881097c75_.book Page 66 Friday, April 8, 2016 2:50 PM

Summary of Contents for VLR 150













































































Search results

Summary of Contents for VLR 150

Reviews:

Related manuals for VLR 150

Brands by name

Popular brands

Motorola VLR 150, User Manual

Search results

Summary of Contents for VLR 150

Reviews:

Related manuals for VLR 150

Brands by name

Popular brands