Motorola VLR 150 User Manual Download Page 24

Page: 24 / 76

Getting S

tarted

Charging the Battery

Use only the charger supplied with the radio, or other VLR150 power accessories.

For optimum battery life, do not charge the battery for prolonged periods after it is

fully charged. Charging the battery over the weekend is acceptable.

Using the Drop-in Charger

1. Place the charger on a flat surface.
2. Insert the plug of the power cord into the jack

on the charger.

3. Plug the cord into an AC outlet.
4. Turn the radio off. If the radio is on while

charging, it will take longer to fully charge.

5. Insert the radio (with battery installed) into

the front charging pocket.

Note:

The radio will fit in the charger with the

holster on.

The drop-in charger will also sequentially charge a spare Li-Ion battery. The spare

battery will not begin to charge until the radio battery is fully charged. Both batteries

will charge in approximately 8 to 10 hours.

6881097c75_.book Page 20 Friday, April 8, 2016 2:50 PM

Summary of Contents for VLR 150













































































Search results

Summary of Contents for VLR 150

Reviews:

Related manuals for VLR 150

Brands by name

Popular brands

Motorola VLR 150, User Manual

Search results

Summary of Contents for VLR 150

Reviews:

Related manuals for VLR 150

Brands by name

Popular brands