Motorola VIP1002E, Installation Manual

Page: 4 / 24

Follow these important safety guidelines when positioning and connecting your TV
receiver:
Do not block the slots and openings. •
Do not place anything on top of the TV receiver. •
Do not position the TV receiver in an enclosed space that would restrict airflow •
around the unit.
Do not position the TV receiver near any external heat source that could raise
•
the temperature around the unit. Do not place the terminal on top of another heat
producing electronic device.
Allow for adequate ventilation around the TV receiver to maintain normal operating •
temperature. Do not place it in a sealed enclosure without providing for adequate
airflow.
Do not plug the AC power cord into a switched power outlet. •
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE. THE UNIT MUST NOT BE EXPOSED TO
DRIPPING OR SPLASHING. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES, ON THE UNIT.
CAUTION: THIS PRODUCT WAS QUALIFIED UNDER TEST CONDITIONS
THAT INCLUDED THE USE OF THE SUPPLIED CABLES BETWEEN SYSTEMS
COMPONENTS. TO ENSURE REGULATORY AND SAFETY COMPLIANCE, USE ONLY
THE PROVIDED POWER AND INTERFACE CABLES AND INSTALL THEM PROPERLY.
CAUTION: DIFFERENT TYPES OF CORD SETS MAY BE USED FOR CONNECTIONS
TO THE MAIN SUPPLY CIRCUIT. USE ONLY A MAIN LINE CORD THAT COMPLIES
WITH ALL APPLICABLE PRODUCT SAFETY REQUIREMENTS OF THE COUNTRY OF
USE.
CAUTION: INSTALLATION OF THIS PRODUCT MUST BE IN ACCORDANCE WITH
NATIONAL WIRING CODES AND CONFORM TO LOCAL REGULATIONS.
CAUTION: DO NOT OPEN THE UNIT. DO NOT PERFORM ANY SERVICING OTHER
THAN THAT CONTAINED IN THE INSTALLATION AND TROUBLESHOOTING
INSTRUCTIONS. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION: CHANGES AND MODIFICATIONS NOT EXPRESSLY APPROVED BY
MOTOROLA FOR COMPLIANCE COULD VOID USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
iv VIP1002E Installation Guide