Motorola VC6000 Series, Product Reference Manual

Page: 139 / 164

Chapter 10 Maintenance and
Troubleshooting
Introduction
This chapter includes instructions on cleaning the VC6000 Series, and provides troubleshooting solutions for
potential problems during VC6000 Series operation.
Maintaining the VC6000 Series
The computer is factory-sealed (except for the SIM card door and memory card slot) and contains no
user-serviceable parts.
Only qualified Motorola Service Centers should service the computer.
For trouble-free service, observe the following tips when using the VC6000 Series:
•
Do not scratch the screen of the VC6000 Series. When working with the VC6000 Series, use stylus or
plastic-tipped pens intended for use with a touch-sensitive screen. Never use an actual pen or pencil or other
sharp object on the surface of the VC6000 Series screen.
•
Although the VC6000 Series is water and dust resistant, do not expose it to rain or moisture for an extended
period of time. In general, treat the VC6000 Series as you would any other electronic device.
•
The screen of the VC6000 Series is glass. Do not to drop the VC6000 Series or subject it to strong impact.
•
Do not store or use the VC6000 Series in any location that is extremely dusty, damp, or wet.
•
Periodically check nuts and bolts to ensure they are tightened to the proper torque.
•
Ensure that all unused connctors and slots are coverd or close.
•
Protect the VC6000 Series from temperature extremes and keep it away from heat sources.
•
Use a soft lens cloth to clean the VC6000 Series. If the surface of the VC6000 Series screen becomes soiled,
clean it with a soft cloth moistened with a diluted window-cleaning solution.
•
Periodically check the vehicle battery to ensure proper product operation. Vehicle battery life depends on
individual manufacture instructions.