background image

 

 

 

   

 

Safety and Compliance

VAP2400 Wireless Video Bridge 

 Installation Manual  

21

est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter 

tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

Caution:

(i) the device for operation in the band 5150

5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel 

mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250

5350 MHz and 5470

5725 MHz shall comply with the e.i.r.p. limit; 

and
(iii) the maximum antenna gain permitted for devices in the band 5725

5825 MHz shall comply with the e.i.r.p. limits specified for point-to-

point and non point-to-point operation as appropriate.
Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250

5350 MHz and 

5650

5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, 

notamment :
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire 

les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se conformer à la 

limite de p.i.r.e.;
(iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite de p.i.r.e. 

spécifiée pour l’exploitation point à point et non point à point, selon le cas.
De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux 

(c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou 

des dommages aux dispositifs LAN-EL. 

IMPORTANT NOTE:

Canada Radiation Exposure Statement:

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be 

installed and operated with minimum distance 20cm between the radiator and your body.

Summary of Contents for vap2400

























Reviews: